Toner, drum and error light means Zero Cross failure.

Drum and error light means fan failure.

Toner and drum light means high voltage failure.

Toner and error light means main motor failure.

Just the drum light means a laser unit failure.

Just the toner light means a fuser unit failure.

Just the error light means a main PCB failure.

You can discover what the actual problem is by pressing the Go button on the printer. The printer will automatically restart.īrother HL-2130 - All Four Lights FlashingĪll four lights flashing on a Brother HL-2130 means a severe fault with the printer.

Release GO, all the LEDs will turn off.

Hold the button until all the LEDs light up and the Ready LED light turns off.

Hold the GO button while you turn the printer on.

Press GO three (3) times within two (2) seconds.

Turn the printer on and wait until it is in Ready mode.

Press GO once more, and the printer will print a test page.Hold the button until the Toner, Drum and Error LEDs light up. Youtube Video: Change Toner Cartridge Brother HL-2130 - Print Test Page Youtube Video: Reset Drum Brother HL-2130 - Change Toner Cartridge Release the GO button and close the front cover. Simply open the front cover, and hold the GO button until all four LED’s are lit. This will turn off the drum warning light on the printer. The Error LED should now be flashing, close the front cover.Īfter changing a DR2200 drum unit in a Brother HL-2130, the printer’s page count needs to be reset.

The Toner, Drum, and Error LEDs will turn on. When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button.Hold the Go button while turning the printer on.If your Brother HL-2130 does not reset properly after putting in a new cartridge, and is still showing a 'toner low' or 'toner empty' message, it is possible to manually reset the printer:

Brother printer not printing test page